PRODUCT INTRODUCTION
The BQX-FK-CTD20/15/13 Vehicle-mounted Electronic Containment System is a wideband radio jamming device with fully digital (DDS) modular design. Simple to operate, it can quickly generate shielding electromagnetic waves in dynamic or static states to prevent remote-controlled explosions and block radio communications/data leakage. It is primarily used for government personnel security, border defense, and protection of large events and critical areas, enhancing mobility through vehicle installation.
20-6000MHz Full-band Coverage
Enables point-to-point configuration for any frequency or channel without dead spots; supports customizable frequency/power settings for various applications.
Configurable 13-20 Modules
Precise frequency division with concentrated energy; allows single-module power/frequency configuration with on/off control; max total power 1700W.
360° Omnidirectional Jamming
High-gain omnidirectional antennas provide comprehensive 360° radio signal handling.
Long-range Containment
Communication signal suppression radius ≥100-1000m; UAV countermeasure range ≥2000m (environment-dependent).
Multi-functional System
Operates as EOD jammer, UAV countermeasure device, signal blocker, walkie-talkie/WiFi/Bluetooth/broadcast jammer.
Mobile Deployment Design
Vehicle-based platform enables rapid emergency response with installation-free deployment.
| PERFORMANCE INDEX | |||
| Configuration | Model A (20ch) | Model B (15ch) | Model C (13ch) |
| Antennas | 20 | 15 | 13 |
| Total TX Power | 1700W | 1300W | 1100W |
| Power Consumption | 4900W | 3800W | 3200W |
| RF Power Allocation | 20-100MHz: 100W | 20-100MHz: 100W | 20-100MHz: 100W |
| 100-400MHz: 100W | 100-400MHz: 100W | 100-400MHz: 100W | |
| 100-400MHz: 100W | — | — | |
| 400-800MHz: 100W | 400-800MHz: 100W | 400-800MHz: 100W | |
| 800-1000MHz: 100W | — | — | |
| 800-1000MHz: 100W | 800-1000MHz: 100W | 800-1000MHz: 100W | |
| 1800-2000MHz: 100W | 1800-2000MHz: 100W | — | |
| 1800-2000MHz: 100W | 1800-2000MHz: 100W | 1800-2000MHz: 100W | |
| 2000-2200MHz: 100W | — | — | |
| 2000-2200MHz: 100W | 2000-2200MHz: 100W | 2000-2200MHz: 100W | |
| 2300-2500MHz: 100W | 2300-2500MHz: 100W | — | |
| 2300-2500MHz: 100W | 2300-2500MHz: 100W | 2300-2500MHz: 100W | |
| 2500-2700MHz: 100W | 2500-2700MHz: 100W | 2500-2700MHz: 100W | |
| 3400-3600MHz: 80W | 3400-3600MHz: 80W | 3400-3600MHz: 80W | |
| 4800-4900MHz: 60W | 4800-4900MHz: 60W | 4800-4900MHz: 60W | |
| 5700-5900MHz: 60W | 5700-5900MHz: 60W | 5700-5900MHz: 60W | |
| 1000-2700MHz: 50W | — | — | |
| 1000-2700MHz: 50W | 1000-2700MHz: 50W | 1000-2700MHz: 50W | |
| 2700-6000MHz: 50W | — | — | |
| 2700-6000MHz: 50W | 2700-6000MHz: 50W | 2700-6000MHz: 50W | |
| Coverage | 20-6000MHz full spectrum | ||
| Jamming Direction | 360° omnidirectional | ||
| CONFIGURATION LIST | |||
| No. | Component | Qty | Specification |
| 1 | D12 Main Unit | 2 units | 13-20 modules, selectable frequencies |
| 2 | D12 Controller | 2 units | Controls module on/off status |
| 3 | Vehicle Antennas | 13-20 | Omnidirectional type |
| 4 | Roof RF Cables | 13-20 | Module-to-antenna connections |
| 5 | D6 Power Distribution Box | 1 set | Holds air switches and relays |
| 6 | USB Converter Cable | 1 | For computer connection and module configuration |
| 7 | Software Installation USB | 1 | Sets frequency/power parameters |
| 8 | (Optional) Antenna Tilt Controller | 1 set | Controls antenna elevation |
| 9 | (Optional) Roof Platform Structure | 1 set | Stainless steel/aluminum construction |
| 10 | (Optional) Linear Actuators | 4 sets | Tilt mechanism |
| 11 | (Optional) Roof Enclosure Frame | 1 set | Custom fabricated housing |
| 12 | Equipment Mounting Rack | 1 set | Secures main units and accessories |
| 13 | Front Control Panel | 1 set | One-touch operation in cabin |
| 14 | External Power Interface | 1 set | For stationary charging |
| 15 | Control Cables | Multiple | Power and tilt control wiring |
| 16 | Connectors | Multiple | Quick-disconnect fittings |
| 17 | RF Connectors | Multiple | For combiners and antennas |
| 18 | Support Materials | Multiple | Labeling tubes, heat shrink, etc |
| 19 | (Optional) Power Take-off System | 1 set | Swiss Dana W13 13kW generator |
| 20 | Auxiliary Batteries | 2 | 12V 100Ah maintenance-free |
